The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60 degrees of tilt while still staying within 20 mm of accuracy. Reach RS3 continuously measures and corrects tilt in real-time to keep you on target.
Survey and stakeout faster, no need to check the bubble.
We calibrate the inertial measurement unit in each device individually at the factory, so you can get your Reach RS3 up and running right out of the box. Unaffected by magnetic fields, RS3’s IMU sensors provide robust tilt compensation even when working close to metal structures. Tilt initialization takes about 20 meters of walking or 10-20 seconds of tilting. Usually ready on the way from the car.
Gets a fix in 5 seconds Reach RS3 gets a centimeter-accurate solution in about 5 seconds. It maintains robust performance even when the sky view is partially obstructed, or the receiver itself is tilted. GPS/QZSS, GLONASS, BeiDou, and Galileo L1C/A, L2C, L1OF, L2OF,B1I, B2I, E1B/C, E5b RINEX logging and PPP support Up to 22 hours on 1 charge Built-in LTE modem
NTRIP Base and Rover Work in RTK with VRS or a single baseline CORS network. You can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster. Compatible with any receiver with RTCM3 support
